TEKLİF İSTE
SU18/16/35/40a/110/115a Raya Montaj 450 mm Algılama Kırmızı Işık light/dark on Push-Pull Çıkış 0,2m Kablolu M8 3 Pin Konnektörlü Fiberoptik Sensör
0,00TL
KDV Hariç: 0,00TL
- Stok Yok: Var
- Marka: Pepperl Fuchs
- Ürün Kodu: SU18/16/35/40a/110/115a
İçerisinde Sipariş Verirseniz Yarın Kargo!
Ücretsiz Kargo
10.000TL Üzeri Kargo Bedava
Banka Havalesi
Banka havalesinde ekstra %4 indirim imkanı
Hızlı Teslimat
Maksimum 2 İş Günü İçinde Kargoya Verilir
Güvenli Alışveriş
256BİT SSL Sertifikası ile Koruma
Ürün Açıklaması | ||
---|---|---|
Fiber optic sensor for glass fiber optics and plastic fiber optics |
General specifications | ||
---|---|---|
Sensor range | up to 460 mm (KLR-C02-2,2-2,0-K146) | |
Detection range | up to 1500 mm (KLE-C01-2,2-2,0-K116) | |
Light source | LED | |
Light type | modulated visible red light , 640 nm | |
Ambient light limit | 10000 Lux | |
Functional safety related parameters | ||
MTTFd | 690 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control | |
Control elements | Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - Standard, High Power, Ultra | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
Ripple | 10 % | |
No-load supply current | ≤ 30 mA | |
Output | ||
Switching type | light/dark on, switchable | |
Signal output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA , resistive load | |
Voltage drop | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA | |
Switching frequency | Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode: 100 Hz | |
Response time | Standard mode: 160 µs , High power mode: 500 µs , Ultra mode: 5 ms | |
Repeat accuracy | ≤ 0.5 % of adjusted sensor range | |
Compliance with standards and directives | ||
Standard conformity | ||
Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -10 ... 55 °C (14 ... 131 °F) | |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Housing width | 9 mm | |
Housing height | 34.5 mm | |
Housing depth | 62.3 mm | |
Degree of protection | IP50 | |
Connection | 200 mm, PVC cable with M8 connector, 3-pin | |
Material | ||
Housing | PC | |
Mass | 45 g |
General specifications | ||
---|---|---|
Sensor range | up to 460 mm (KLR-C02-2,2-2,0-K146) | |
Detection range | up to 1500 mm (KLE-C01-2,2-2,0-K116) | |
Light source | LED | |
Light type | modulated visible red light , 640 nm | |
Ambient light limit | 10000 Lux | |
Functional safety related parameters | ||
MTTFd | 690 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control | |
Control elements | Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - Standard, High Power, Ultra | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
Ripple | 10 % | |
No-load supply current | ≤ 30 mA | |
Output | ||
Switching type | light/dark on, switchable | |
Signal output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA , resistive load | |
Voltage drop | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA | |
Switching frequency | Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode: 100 Hz | |
Response time | Standard mode: 160 µs , High power mode: 500 µs , Ultra mode: 5 ms | |
Repeat accuracy | ≤ 0.5 % of adjusted sensor range | |
Compliance with standards and directives | ||
Standard conformity | ||
Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -10 ... 55 °C (14 ... 131 °F) | |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Housing width | 9 mm | |
Housing height | 34.5 mm | |
Housing depth | 62.3 mm | |
Degree of protection | IP50 | |
Connection | 200 mm, PVC cable with M8 connector, 3-pin | |
Material | ||
Housing | PC | |
Mass | 45 g |