TEKLİF İSTE
NCB4-12GM40-N0
0,00TL
KDV Hariç: 0,00TL
- Stok Yok: Var
- Marka: Pepperl Fuchs
- Ürün Kodu: NCB4-12GM40-N0
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 4 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 3.24 mm | |
| Actual operating distance | 3.6 ... 4.4 mm typ. | |
| Reduction factor rAl | 0.41 | |
| Reduction factor rCu | 0.39 | |
| Reduction factor r304 | 0.78 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 1500 Hz | |
| Hysteresis | 1 ... 15 typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | yes | |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | |
| Current consumption | ||
| Measuring plate not detected | min. 2.2 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Switching state indicator | all direction LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 3010 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
| Electromagnetic compatibility | NE 21:2007 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 012/2011 | |
| FM approval | ||
| Control drawing | 116-0165 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 2 m | |
| Core cross-section | 0.34 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Degree of protection | IP66 / IP67 | |
| Cable | ||
| Bending radius | > 10 x cable diameter | |
| Equipment protection level Ga | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking |  II 1G Ex ia IIC T6…T1 Ga The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions | |
| Appropriate type | NCB4-12GM...-N0... | |
| Effective internal inductivity | max. 120 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. | |
| Ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1. | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 1G Ex ia IIC T6…T1 Ga The Ex-significant identification is on the enclosed adhesive label | |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions | |
| Appropriate type | NCB4-12GM...-N0... | |
| Effective internal inductivity | max. 120 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. | |
| Equipment protection level Gc (ic) | ||
| Certificate | PF 13 CERT 2895 X | |
| CE marking | [*PD-Z02586A*] | |
| ATEX marking | II 3G Ex ic IIC T6…T1 Gc The Ex-significant identification is on the enclosed adhesive label | |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection category "ic" Use is restricted to the following stated conditions | |
| Effective internal inductivity | max. 120 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µH ; A cable length of 10 m is considered. | |
| Special conditions | ||
| for Pi=34 mW, Ii=25 mA, T6 | 74 °C (165.2 °F) | |
| for Pi=34 mW, Ii=25 mA, T5 | 89 °C (192.2 °F) | |
| for Pi=34 mW, Ii=25 mA, T4-T1 | 100 °C (212 °F) | |
| for Pi=64 mW, Ii=25 mA, T6 | 69 °C (156.2 °F) | |
| for Pi=64 mW, Ii=25 mA, T5 | 84 °C (183.2 °F) | |
| for Pi=64 mW, Ii=25 mA, T4-T1 | 100 °C (212 °F) | |
| for Pi=169 mW, Ii=52 mA, T6 | 51 °C (123.8 °F) | |
| for Pi=169 mW, Ii=52 mA, T5 | 66 °C (150.8 °F) | |
| for Pi=169 mW, Ii=52 mA, T4-T1 | 74 °C (165.2 °F) | |
| for Pi=242 mW, Ii=76 mA, T6 | 39 °C (102.2 °F) | |
| for Pi=242 mW, Ii=76 mA, T5 | 52 °C (125.6 °F) | |
| for Pi=242 mW, Ii=76 mA, T4-T1 | 52 °C (125.6 °F) | |
| Equipment protection level Gc (nL) | ||
| Standard conformity | EN 60079-15:2003 Ignition protection category "n" Use is restricted to the following stated conditions | |
| Effective internal capacitance Ci | max. 120 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance Li | max. 50 µH ; A cable length of 10 m is considered. | |
| General | The apparatus has to be operated according to the appropriate data in the data sheet and in this instruction manual. The data stated in the data sheet are restricted by this operating instruction! The special conditions must be observed! The ATEX Directive applies only to the use of apparatus under atmospheric conditions. If you use the device outside atmospheric conditions, consider that the permissible safety parameters should be reduced. | |
| Special conditions | ||
| for Pi=34 mW, Ii=25 mA, T6 | 74 °C (165.2 °F) | |
| for Pi=34 mW, Ii=25 mA, T5 | 89 °C (192.2 °F) | |
| for Pi=34 mW, Ii=25 mA, T4-T1 | 
TEKLİF İSTE
Ürün Kodu: UB400-12GM-I-V1 Ürün AçıklamasıSingle head systemGeneral specificationsSensing range30 ... 400 mmAdjustment range50 ... 400 mmDead band0 ... 30 mmStandard target plat..
0,00TL
KDV Hariç:0,00TL
-45 %
Ürün Kodu: TF31-34H Teknik özellik dosyalarıGösterim yöntemi7-segment LEDKontrol yöntemiON/OFF kontrolGiriş kanalı sayısı1 kanal [sıcaklık + Dijital giriş(D1)]Giriş dosya..
2.863,42TL 5.206,21TL
KDV Hariç:2.386,18TL
TEKLİF İSTE
Ürün Kodu: 101136322 Uzun ömürManuel bırakmaKompakt tasarımÇift izolasyonluEtkili tutma kuvvetiTermoplastik muhafaza90 mm x 84 mm x 30 mmIDC sonlandırma metodu1 Kablo giri..
0,00TL
KDV Hariç:0,00TL
Ürün Kodu: NT6-04018 NT6-04018 Sick Kontrast Sensörü 9mm algılama, 0,,6v analog çıkışlı Özellikler
Boyutlar ( G x Y x D)
80 mm x 30..
12.525,57TL
KDV Hariç:10.437,97TL
TEKLİF İSTE
Ürün Kodu: OBT400-L2-E2-V1 Ürün AçıklamasıDiffuse mode sensorGeneral specificationsDetection range0 ... 400 mmLight sourceLEDLight typemodulated visible red lightIndicators/oper..
0,00TL
KDV Hariç:0,00TL
TEKLİF İSTE
Ürün Kodu: OQT150-R101-2EP-IO-0,3M-V1-L Ürün AçıklamasıSwitching diffuse mode sensor with measurement core technology, 150 mm detection range, red laser light, laser class 1, IO-Link, 2 x pu..
0,00TL
KDV Hariç:0,00TL
-40 %
Ürün Kodu: EP50S8-512-1F-N-5 Mil dış çapı Ø8mm Azami Tepki frekansı 35kHz Azami izin verilen devir 3000rpm Başlama torku Azami 70gf.cm (Azami 0.0069N.m) Çözün..
5.296,51TL 8.827,52TL
KDV Hariç:4.413,76TL
-45 %
Ürün Kodu: TK4S-T4RN Teknik özellik dosyalarıGösterim yöntemi4-hane 7-segment LEDKontrol yöntemiON/OFF kontrol, P, PI, PD, PID kontrolGiriş dosyasıTermokopul K(CA), J(IC),..
2.790,99TL 5.074,53TL
KDV Hariç:2.325,83TL
TEKLİF İSTE
Ürün Kodu: OBT300-R200-2EP-IO-V1 Ürün AçıklamasıTriangulation sensor with background suppressionGeneral specificationsDetection range30 ... 300 mmDetection range min.30 ... 80 mmDetec..
0,00TL
KDV Hariç:0,00TL
TEKLİF İSTE
Ürün Kodu: OQT120-R103-EP-IO-V3 Ürün AçıklamasıMeasuring sensor with multiple switch points, small design, background suppression and more adjustable operating modes, IO-Link interfa..
0,00TL
KDV Hariç:0,00TL | |