TEKLİF İSTE
NBB3-V3-Z4-3G-3D Minyatür Kübik İki Telli, NO, 130mm Kablolu, 3mm Algılama, Gömülebilir Montaj, Endüktif Sensör ATEX ZONE 2 ZONE 22
0,00TL
KDV Hariç: 0,00TL
- Stok Durumu: Var
- Marka: Pepperl Fuchs
- Ürün Kodu: NBB3-V3-Z4-3G-3D
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire | |
| Rated operating distance | 3 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 2.4 mm | |
| Actual operating distance | 2.7 ... 3.3 mm typ. | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.5 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Operating voltage | 5 ... 60 V DC | |
| Switching frequency | 0 ... 2000 Hz | |
| Hysteresis | typ. 0.2 mm | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | no | |
| Inductive overvoltage protection | yes | |
| Voltage drop | ≤ 4 V | |
| Voltage drop at IL | ||
| Voltage drop IL = 10 mA, switching element on | 3.4 ... 3.9 V typ. 3.6 V | |
| Operating current | 4 ... 100 mA | |
| Lowest operating current | 4 mA | |
| Off-state current | 0.4 ... 0.55 mA typ. 0.46 mA | |
| Time delay before availability | ≤ 1 ms | |
| Switching state indicator | LED, yellow | |
| Limit data | ||
| Tightening torque, fastening screws | 0.4 Nm | |
| Functional safety related parameters | ||
| MTTFd | 1552 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Standard conformity | ||
| EMC in accordance with | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 130 mm | |
| Core cross-section | 0.14 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Cable | ||
| Bending radius | > 10 x cable diameter | |
| Equipment protection level Gc (nA) | ||
| Certificate | PF 15CERT3754 X | |
| CE marking | [*PD-Z02586A*] | |
| ATEX marking |  II 3G Ex nA IIC T6 Gc The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-15:2010 Ignition protection category "n" Use is restricted to the following stated conditions | |
| Special conditions | ||
| Maximum operating current IL | The maximum permissible load current must be restricted to the values given in the following list. High load currents and load short-circuits are not permitted. | |
| Maximum operating voltage UBmax | The maximum permissible operating voltage UB max is restricted to the values in the following list. Tolerances are not permissible. | |
| Maximum permissible ambient temperature TUmax | dependant of the load current IL and the max. operating voltage UBmax Information can be taken from the following list. | |
| at UBmax=60 V, IL=100 mA | 38 °C (100.4 °F) | |
| at UBmax=60 V, IL=50 mA | 52 °C (125.6 °F) | |
| at UBmax=60 V, IL=25 mA | 57 °C (134.6 °F) | |
| at UBmax=30 V, IL=100 mA | 36 °C (96.8 °F) | |
| at UBmax=30 V, IL=50 mA | 50 °C (122 °F) | |
| at UBmax=30 V, IL=25 mA | 57 °C (134.6 °F) | |
| Equipment protection level Dc (tc) | ||
| CE marking | [*PD-Z02586A*] | |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-31:2014 Protection by enclosure "tc" Some of the information in this instruction manual is more specific than the information provided in the datasheet. | |
| General | The corresponding datasheets, declarations of conformity, EC-type examination certificates, certifications, and control drawings, where applicable (see datasheets), form an integral part of this document. These documents can be found at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the information provided in the datasheet. | |
| Special conditions | ||
| Maximum permissible ambient temperature TUmax | dependant of the load current IL and the max. operating voltage UBmax Information can be taken from the following list. | |
| at UBmax=60 V, IL=100 mA | 38 °C (100.4 °F) | |
| at UBmax=60 V, IL=50 mA | 52 °C (125.6 °F) | |
| at UBmax=60 V, IL=25 mA | 57 °C (134.6 °F) | |
| at UBmax=30 V, IL=100 mA | 36 °C (96.8 °F) | |
| at UBmax=30 V, IL=50 mA | 50 °C (122 °F) | |
| at UBmax=30 V, IL=25 mA | 57 °C (134.6 °F) | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 3G; 3D | |
| Certificates | Sertifika No. | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | 99 KB | |
| Canada USA UL Ordinary Location | 20170306-E87056 | 407 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 D Certificate | PF15CERT3774X | 1001 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G Certificate | PF15CERT3754X | 1015 KB |
| Certificates | Sertifika No. | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | 99 KB | |
| Canada USA UL Ordinary Location | 20170306-E87056 | 407 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 D Certificate | PF15CERT3774X | 1001 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G Certificate | PF15CERT3754X | 1015 KB |
