TEKLİF İSTE
ML100-55/115b/120 Minyatür Gövde 10-30VDC, 2 x PNP, L.On + D.On, 5000mm Algılama Kırmızı Işıklı, 0,3m Kablolu M12 4 Pin Konnektörlü Polarize Reflektörlü Fotosel
0,00TL
KDV Hariç: 0,00TL
- Stok Yok: Var
- Marka: Pepperl Fuchs
- Ürün Kodu: ML100-55/115b/120
İçerisinde Sipariş Verirseniz Bugün Kargo!Ücretsiz Kargo
10.000TL Üzeri Kargo Bedava
Banka Havalesi
Banka havalesinde ekstra %4 indirim imkanı
Hızlı Teslimat
Maksimum 2 İş Günü İçinde Kargoya Verilir
Güvenli Alışveriş
256BİT SSL Sertifikası ile Koruma
| Ürün Açıklaması | ||
|---|---|---|
| Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, 2 PNP outputs, fixed cable with M12 plug | ||
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 5 m | |
| Threshold detection range | 7 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Polarization filter | yes | |
| Diameter of the light spot | approx. 500 mm at a distance of 7 m | |
| Angle of divergence | approx. 4 ° | |
| Functional safety related parameters | ||
| MTTFd | 860 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted | |
| Control elements | sensitivity adjustment | |
| Control elements | Light-on/dark-on changeover switch | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally closed / light-on /Q - Pin2: PNP normally open / dark-on | |
| Signal output | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 300 mm fixed cable with 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 5 m | |
| Threshold detection range | 7 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Polarization filter | yes | |
| Diameter of the light spot | approx. 500 mm at a distance of 7 m | |
| Angle of divergence | approx. 4 ° | |
| Functional safety related parameters | ||
| MTTFd | 860 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted | |
| Control elements | sensitivity adjustment | |
| Control elements | Light-on/dark-on changeover switch | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally closed / light-on /Q - Pin2: PNP normally open / dark-on | |
| Signal output | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 300 mm fixed cable with 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
