![2857-535/000-001 RTD , Termokupl multifonksiyon Çevirici, RS-485 üzerinden Modbus RTU, 2 iletkenli, Max. 64 2857-535/000-001 RTD , Termokupl multifonksiyon Çevirici, RS-485 üzerinden Modbus RTU, 2 iletkenli, Max. 64](https://msgelektrik.com.tr/image/cache/catalog/wago/arayuz/2857-535_000-001-500x500h.jpg)
STOK SORUNUZ
-55 %
2857-535/000-001 RTD , Termokupl multifonksiyon Çevirici, RS-485 üzerinden Modbus RTU, 2 iletkenli, Max. 64
11.232,58TL
24.961,29TL
KDV Hariç: 9.360,48TL
- Stok Yok: Stokta yok
- Marka: Wago
- Ürün Kodu: 2857-535/000-001
![](https://msgelektrik.com.tr/image/cache/catalog/journal3/kargo-icon-yeni-25x25.png)
Ücretsiz Kargo
10.000TL Üzeri Kargo Bedava
Banka Havalesi
Banka havalesinde ekstra %4 indirim imkanı
Hızlı Teslimat
Maksimum 2 İş Günü İçinde Kargoya Verilir
Güvenli Alışveriş
256BİT SSL Sertifikası ile Koruma
This RTD TC temperature signal conditioner for RTD sensors, potentiometers, resistors and thermocouples monitors and reports signals for up to two switching thresholds. The sensor and status information that is collected is also made available to a higher-order device (e.g., a PLC) via a bus connection.
Features:
- A relay with changeover contact reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values)
- Configurable Pt factor
- Adjustable software filter
- Simulation of input/output response via interface configuration display
- Input of customer-specific sensors via the interface configuration software
- Safe 3-way isolation with 3 kV test voltage per EN 61010-1
- Output-end RS-485 interface with Modbus protocol
- Terminating resistor can be adjusted at the output
- Adjustable transfer characteristic